Where Do I Pick a Best Battery Charger! | Smart Guides To Get a Best Auto charger

Intelligent Battery Charger 3 in 1

For all 12 volt automotive battery types: lead, AGM (absorbed glass mat) Gel and deep cycle.

This charger initiates and 8-stage charging cycle which charges and maintains battery. Additionally there is a boost mode for battery rescue. The charger can also be used to test the battery with connecting to a 100v – 240v AC supply. It features overload, short circuit and polarity reversal protection.

Includes a “snow” mode for charging in temperatures below 0 °C.
Note: Never attempt to charge a battery with frozen electrolyte.

The charger is supplied with two methods of connection:

Insulated battery clamps
Eyelet connectors for motorcycles
Onboard 12v connector

Specifications

Charging Mode	Charge Voltage	Normal mode: 14.4v DC Snow mode: 14.7v DC Boots (Rescue): 16.5v DC
	Charge Current Range	1A / 4A / 6A selectable
	Efficiency	> 85% @ Full Load
	Normal Charging Mode	8-stage charging
	Snow Charging Mode	Charging when temperature is under 0°C
	Boost (Rescue) Mode	16.5v – 80% output of select current
Input	Input Frequency Range	47 ~ 63Hz
Input	Input Voltage Range	100v – 240v AC
Protections	Reverse Polarity	YES
	Disconnect	YES
	Over Temperature	Output power drops until temperature is within limits.
	Short Circuit	YES
	Wrong Battery Type	YES. (No charge when Vbat < 2v or Vbat > 15v)
Environment	Operating Temperature	-20°C ~ 40°C
	Operating Humidity	10 – 95% RH
	Shock	20G \| Package
LED Status	Charging Mode	Normal Mode: No LED on.
		Snow Mode: LED on. (Orange LED)
		Boost (Rescue) Mode: LED Flicker. (Orange LED)
	Error Indicator Status	Error LED On: error status Error LED Flicker: battery damage (Red LED)
	Battery Test Mode Indicator	Discharged LED: The battery must be charged. (Red LED)
		Low LED: The battery must be charged. (Green LED)
		Medium LED: The battery must be charged. (Green LED)
		Full LED: The battery is full. (Green LED)
Safety and EMC	Safety Standards	EN 60335 and CEC
	Withstand Voltage	Meet I/P – O/P:3Kv AC I/P – FG:1.5Kv AC O/P – FG:0.5Kv AC
	Isolation Resistance	Meet 100M ohms \| 500VDC at 25°C
	EMI Conduction and Radiation	CISPR22 class B
	Harmonic Current	EN61000-3-2, -3
	Certificate	CE \| IV \| FCC \|
	EMS Immunity	EN55014-4-2
Others	MTBF	150k hours min. MIL-HDBK-217F (25°C)
	Type of Batteries	Lead Acid Battery
	Dimension (L x W x H)	176mm x 77mm x 46mm
	Weight	0.59kg

For further assistance please don’t hesitate to contact with us through 6281 2001 or you may visit our main website (www.singtech.com.sg) to view other product that we offer.